18 manufacturing jobs found in Huddersfield

World Class Defence Organisation based in Bolton is currently looking to recruit 4x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....

Manufacturing Engineer Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process. Route card changes as a result or rework activities. Management of Configuration Control by...

World Class Defence Organisation based in Bolton is currently looking to recruit 2x Manufacturing Engineers. Rate: £35.00 per hour Location: Bolton Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Manufacturing Engineer Job Description: As a Manufacturing Engineer within the unit & missile assembly manufacturing facility your focus will be to ensure that our products are built efficiently and to budget. A key member of the Manufacturing Engineering team, you will carry out activities in support of multi-project manufacturing. Compilation and update of Manufacturing Instructions. Design, Commissioning and proving of associated tooling. Support the industrial validation process through the use of FMEA’s, FAI’s etc. Resolution of technical problems that may arise during the manufacturing process....

The Interim Electronic Test Engineer will support and lead all validation programs for electronic components/products, validating to key product specifications, supporting customers in the areas of research and development, new product introduction and VA/VE programs. Client Details The organisation is a well-established entity within the industrial and manufacturing sector, offering innovative engineering solutions. As a mid-sized company, they are committed to maintaining high standards and delivering excellence in their field. Description The interim Electronic Test Engineer responsibilities will include: Support preparation & selection of validation plans for electronic components based on the product specification. Execute multiple, complex, long duration tests designed to stress micro-electronic circuitry both thermally and mechanically. Support root cause analysis when failure mode is detected. Responsible for maintaining and setting up Laboratory tests to company...

Contract - Multi Skilled Maintenance Engineer (Mechanical or Electrical bias considered) Location: Leeds Hourly rate: £38.00-40.00 Inside IR35 Working hours: 12-hour shifts (days and nights) - 4 days on 4 days off Please note: Sponsorship is not available for this role. The Role As a Maintenance Engineer, you will be responsible for ensuring the reliability and performance of production equipment by carrying out planned and reactive maintenance activities. You will work closely with operations teams to minimise downtime and improve machine performance. An exciting opportunity has arisen to join a large, well-established manufacturing business with modern facilities in the Leeds area with lots of career progression opportunities and PLC training. Due to expansion and increased staffing across shift teams, we are currently recruiting 05 Maintenance Engineers to support operations within a highly automated production environment. Key Responsibilities Perform planned...

Maintenance Engineering Contractors – Immediate Start (Inside IR35) Ongoing Project | Days-Based | FCSA Umbrella | Manufacturing Environment We are currently seeking an experienced Contract Maintenance Engineer to support a key project within a busy production environment. This is a critical role, where you will be responsible for delivering both planned and reactive maintenance across a range of automated machinery and production equipment. You will play a key part in ensuring minimal downtime and supporting the successful delivery of the project. To be considered, you must be multi-skilled, with strong electrical competencies and relevant electrical qualifications. A solid understanding of mechanical systems is also essential. This is a contract position for approximately six months, offering the opportunity to work on a high-impact project within a fast-paced manufacturing setting. Key Responsibilities: * Support my client with an engineering project. * Machinery...

World Class Defence Organisation is currently looking to recruit 2x Missile Test Architect subcontractors on an initial 6 month contract.    Rate: £60.00 per hour Location: Stevenage or Bolton (depending on your preference)   Hybrid / Remote working: This role is a hybrid role, 1-2 days a week possibly in lab up to 3 in first weeks Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Missile Test Architect Job Description: The department are looking for experienced test equipment engineers that want to use their knowledge in a system/sub system management role. The role includes determining the project test equipment needs, managing the requirements for test equipment and managing the development through delivery and into service. In this role, you will be responsible for the projects test equipment and...

MERITUS are recruiting for a Supply Chain Manager to join our Defence client on an initial 6 month contract within their equipment's team in Bolton. SUPPLY CHAIN MANAGER - INSIDE IR35 - £50 PER HOUR - BOLTON, GREATER MANCHESTER - 6 MONTHS - SINGLE STAGE INTERVIEW PROCESS Overview of the Department An opportunity has arisen for a Supply Chain Manager to join an equipment-focused team. The successful candidate will use their experience and knowledge to support effective supplier performance, capability, and risk management. The team operates across multiple programmes within a dynamic environment, managing and implementing both established and emerging technologies. Responsibilities, Skills & Experience Required Strong internal and external assessment capabilities, including: Business maturity Planning and control Relationship management Manufacturing excellence Strong interpersonal skills with the ability to develop and expand professional networks Desirable: SC21...

Our client has an opportunity for an Electrical Calibration Operator to join them on a 12-month contract. You will be a be valued member of the Manufacturing function and you will be tasked to carry out routine calibration of Special To Type Test Equipment (STTE) and Commercial Off The Shelf (COTS) equipment. Role: Electrical Calibration Operator Location: Bolton - fully onsite Clearance: BPSS required to start Hourly Rate: £28.35 via Umbrella - inside IR35, rising to £29.70 after 3 months What you'll be doing: Working in a multi discipline team to support the Operations team. Initial calibration, routine calibration and maintenance of test and measurement equipment. Ensure that both factory and proprietary test and measuring equipment is maintained in line with current procedures. Carry out calibration and repair tasks in accordance with departmental processes and procedures. Generating clear and comprehensive calibration/maintenance records for traceability purposes....

Our client has an opportunity for a Production Test Engineer to join their team on a contract basis for 12 months. You will play a vital role in supporting testing and diagnostics of electrical/electronic sub-systems and circuit cards during the production phase of the product lifecycle. You will use your experience to provide technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements. Role: Production Test Engineer - Live Build Location: Stevenage - fully onsite Hours: 37 per week Hourly Rate: £32-£36 per hour via Umbrella, inside IR35 Clearance: SC required before starting, UK Eyes Only due to project What you'll be doing: You will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment, carrying out the following: Providing test engineering support to operators on the shopfloor, including supporting the introduction of new test...

MERITUS are recruiting for a Principal Quality Assurance Engineer to support with Supply Chain engineering programmes in the defence sphere from our client's site in Bolton. Please note, there will be regular supplier visits to international sites and you must have awareness of AS9100 and ISO 9001. PRINCIPAL QUALITY ASSURANCE ENGINEER - INSIDE IR35 - £45 PER HOUR (£333 PER DAY) - 6 MONTHS - 2 STAGE INTERVIEW PROCESS - Bolton (+INTERNATIONAL TRAVEL) Complete scheduled Quality Assurance audits at suppliers using standardised tools Conduct thorough verification / inspection of products to ensure they meet the required quality standards Identify and document any non-conformities in the manufacturing process and deviations from the product specifications Maintain accurate and organized records of all quality control activities Communicate findings to relevant departments / stakeholders and work cross functionally to implement root cause corrective actions at supplier Contribute to...

Location: Bolton OR Stevenage (2 days per week onsite + supplier travel) Duration: 6 month initial contract Inside IR35 Role details: Our client, a prominent defence organisation, is strengthening its Quality Division and has opportunities for Quality Assurance Engineers to join their Supply Chain team on a contract basis. This role will be based in either Stevenage or Bolton, with the flexibility of hybrid working and travel to UK supplier sites. Responsibilities: The primary responsibility will be to plan and conduct supplier quality audits / surveillance activities to drive future process control. In addition, where applicable carry out inspection / verification activities to support the delivery of conforming production hardware. While ensuring adherence to our customer and supplier requirements. Complete scheduled Quality Assurance audits at suppliers using standardised tools. Conduct thorough verification and inspection of products to ensure they meet the required...

World Class Defence Organisation based in Bolton is currently looking to recruit an Electrical Inspector Subcontractor on an initial 12 month contract.   Experience with inspecting the work of other people is essential.   Job Title: Electrical Inspector Rate: £28.35 rising to £29.70 after 12 weeks Location: Bolton   Hybrid / Remote working: Onsite. Standard Days, not shift work Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week are paid at ‘time and a half’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)   Electrical Inspector Job Description: Responsible for all elements necessary to achieve and maintain the quality of deliverable hardware. Certification of product in line with processes and procedures. Examining for correct assembly including verifying all forms of electrical connections. Examining the finish of all parts to detect faulty finishing or painting, deterioration of surfaces etc....

World Class Defence Organisation is currently looking to recruit a Supplier Planner subcontractor on an initial 6 month contract.  This role could suit a candidate from a MRP Controller, Supply Scheduler or Supply Chain Specialist background. This role is looking for a candidate with the following experience: MRP planning experience and ideally some exposure to SAP Manufacturing environment. Supply chain experience Rate: £27.00 per hour Location: Bolton Hybrid / Remote working: Hybrid role of 3 days per week onsite, 2 days working from home Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)                                                                                                                                           Supplier Planner Job Description: This opportunity plays a significant part in...

World Class Defence Organisation is currently looking to recruit a Supply Chain Manager subcontractor on an initial 6 month contract.    Rate: £50.00 per hour Location: Stevenage or Bolton, depending on your preference. Hybrid / Remote working: 2 days onsite per week Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella) Supply Chain Manager Job Description: An opportunity has arisen for a Supply Chain Manager to join ISP in the Equipment's team. The successful candidate will bring their experience and knowledge to ensure effective Supplier performance, capability & Risk management. As a team, we work across all programmes in a changing environment, managing and implementing both mature and new technologies. Responsibilities /Skillset/experience required: Internal and external assessment skills/knowledge;...

World Class Defence Organisation is currently looking to recruit a Electronics Design Engineer / Test Design Support Engineer subcontractor on an initial 6 month contract.   This role would suit a candidate who comes from an Electronics Design Engineer, Electronics Engineer, Production Support Engineer or Test Systems Designer background. Rate: £65.00 per hour Location: Bolton Hybrid / Remote working: 4-5 days a week onsite (possible for remote work occasionally). Compressed week of working Monday to Thursday is available. Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 6 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)      Interview Process: One stage Video Interview Test Design Support Engineer Job Description: The department have an excellent opportunity for experienced Electronic Design Engineers to play a leading role in the support of production...

World Class Defence Organisation is currently looking to recruit a Project Officer subcontractor on an initial 12 month contract.   Rate: £30.00 per hour Location: Bolton Hybrid / Remote working: Hybrid role of 3 days per week onsite Contract: 37 Hours per week Overtime: Hours worked over 37 hours per week will be calculated at ‘time and a quarter’ Duration: 12 Months (initially and then ongoing and long-term thereafter) IR35 status: Inside IR35 (Umbrella)      Interview Process: One stage onsite Interview Project Officer Job Description: This role will require you to work with the Manufacturing project teams in delivering missiles and test equipment throughout their product life-cycles and in accordance with established company project control methodologies. The role of Project Officer provides support to a range of deliverables across multiple Manufacturing task areas and can provide a stepping stone for further progress within a project management environment. The Project...

Senior EC&I Designer Location: Warrington (Hybrid Working) Rate: £53.00 – £65.00 per hour (Inside IR35) Hours: 40 hours per week Security Clearance: SC Clearance required Sector: Nuclear The Opportunity We are recruiting for a Senior EC&I Designer to support the delivery of complex nuclear engineering projects within a highly regulated environment. This is a key role where you will lead Electrical, Control & Instrumentation design activities, provide technical leadership to a multi-disciplinary team, and ensure high-quality, compliant design outputs across the full project lifecycle. Key Responsibilities Lead EC&I design activities across nuclear projects from concept through to detailed and production design Allocate and review work, ensuring all deliverables meet nuclear industry standards and regulatory requirements Produce and check EC&I design outputs, including: Schematics Wiring diagrams Loop diagrams Cable schedules General arrangements...